Zeni Lite Buoy Co. Ltd. 4180026 ユーザーズマニュアル
Installation
Page 14
5.4 Transceiver connections
The function of each connector is identified in Figure 6 Note that the sensor interface connections are only
functional in product configurations including sensor interfacing. The function and pin allocation for each
connector is described in the following sections.
functional in product configurations including sensor interfacing. The function and pin allocation for each
connector is described in the following sections.
Figure 6
Transceiver connector locations
5.4.1
24 way interface connector
This connector provides power to the transceiver along with access to the USB port for configuration. It also
provides access to the built in ISENSE loop. An accessory cable for connection to the 24 way connector is
provided with the product.
provides access to the built in ISENSE loop. An accessory cable for connection to the 24 way connector is
provided with the product.
5.4.2
Accessory cable
The accessory cable provided with the product separates into three cables: power, data and USB as shown in
Figure 7. Table 1 provides the functions of each of the 24 connections.
Figure 7. Table 1 provides the functions of each of the 24 connections.
T1
T1+S
T3
T3+S
!
The supplied sealing caps must be fitted to any unused connections.
18 way connector 1
18 way connector 2
VHF antenna
GPS antenna
Ground stud
24 way connector
T1
T1+S
T3
T3+S