Mesh Systems LLC DS003 ユーザーズマニュアル

 

 

 

P a g e

 | 20 

Version 1.0 

Figure 14: Sensor Installation Details 

 

Field Definitions: 

Identification Section 
Field Name 

Req 

Description 

Sensor Name 

Y 

The system will assign the next sequential, installed sensor number 
as the sensor name.  This may be overridden.   
Suggestions Sensor Naming Conventions: 
- Unique Sensor identification within an existing device type (e.g., 
identify your device or trap for which the sensor is placed)  
Example:  Trap 27 Sensor 01 
- Location of the sensor / device type within the site facility; this 
allows the field technician to easily locate the device from 
automated ActiveSense notifications.   
Example:  Interior, Zone C,  Floor 1  
Default value:  Sensor XX 

Interior / Exterior  

Y 

Identify if the sensor is located within the interior or exterior of the 
site facility. 
This sensor attribute is used to associate a default configuration 
for the type of trap (device type) and location for which the sensor 
is placed.  
Default value:  Interior 

Device Type 

Y 

Identify the specific device type from which the sensor is placed.  
These device types are uniquely configured for the PMP branch 
servicing the site.   
This sensor attribute is used to associate a default configuration 
for the type of trap (device type) and location for which the sensor 
is placed.  

Description  

N 

Enter any additional sensor, device, or location details for the 
sensor that may assist in sensor identification  

Floor 

Y 

If multiple levels/floor exist for the site facility, identify the floor 
level for which the sensor has been installed.  
 
Default value: 1