ABUS AZ4111 ユーザーズマニュアル

 

 

11

UK 

 

IMPORTANT:   Some zone types cannot be blocked. You 

can only block zones released during the 
programming of the zone property. Zones 
that cannot be blocked are displayed with 
an “X” after the zone number. The control 
unit shows: 

 

 
 
 
 
 
To activate the alarm system with blocked zones: 
 
Enter your user code and activate an area. The system 
emits an error tone and the display shows (example): 

 

 
 
 
 
 
To activate the alarm system with the blocked zone, press 
the following key: 

.

 

If you have blocked more than one zone, press the key 
again until you have confirmed all zones. If you do not 
want to activate the alarm system, press the following key: 

.

 

 
After you have activated the last zone, the alarm system 
starts the delay time. 
 
IMPORTANT:  Blocked zones are blocked for one 

activation period only.  

 

The first user code is also the master code. With this 
code, you can create further user codes and user names.

 

The alarm system can store up to 16 user codes. All users 
should have their own codes.

 

Every time a user is entered, this event is stored in the 
event memory with the user number B001, B002,…. 
The factory-set codes for users 002 to 016 are x002 to 
x016. 
 
Apart from the user codes, there is also a panic code 
(B017). If the panic code is entered instead of the user 
code to deactivate the alarm system, the alarm system is 
deactivated, but another exit is activated that can be 
silently transmitted by telephone.

 

 
User codes B002 to B016 plus the panic code B017 do 
not function until they are changed. 
 
To change the user code: 
 
Enter the master code. 
 
The control unit shows: 
 
 
 
 
 
Press: 

 

 
The control unit shows: 
 
 
 
 
 
 
Enter the user code you want to change. If the user codes 
have not been changed, enter for users B002 to B016 and 
for the panic code B017 the codes x002 to x016 and x017 
respectively.