ABUS AZ4111 ユーザーズマニュアル

 

 

9

UK 

 
You can deactivate your alarm system at any time (even 
after an alarm) by entering a valid user code. When you 
enter the object through an entry/exit zone, the 
programmed entry delay time starts. You now have to 
enter your user code within the programmed delay time, 
otherwise an alarm is triggered when the delay time 
expires. Proceed as follows:

 

 
Enter the building by a door programmed as an entry/exit 
door. The entry delay time starts. A fast pulsed signal tone 
is sounded.

 

 
 
 
 
 
Enter a valid user code: 

If you enter a valid code before the entry delay time 
expires, the alarm system is deactivated. A double tone 
follows and the LCD display shows the date and time 
again.

 

If an alarm situation occurs when the alarm system is 
active, an internal, local or external alarm is triggered, 
depending on the setting in the program menu. After the 
alarm centre is deactivated, the zone that triggered the 
alarm is displayed. The alarm centre shown the zone via 
the LCD display: 

 

 
 
 
 
 
Following an alarm, the alarm system must be reset. 

 

 
 

 
 
 
 
 
To reset following an alarm, you have to enter a valid user 
code. Enter the user code again. 

 

 
IMPORTANT:   If defined in the program menu, you have 

to enter a program code (installer code) to 
reset the alarm centre.