ABUS AZ4111 ユーザーズマニュアル
10
UK
9 User
functions
A series of functions can be performed via the control unit.
Summary of user functions.
Summary of user functions.
Input
Function
User code +
Locks a zone
Master code +4
Changes user name and
user code
user code
User code +5
Displays the event memory
Master code +6
Date and time input
User code +7
Switches door chime on/off
User code +8
Tests acoustic and visual
signalling device
signalling device
User code +9
Walk test
To perform these functions, you have to enter a valid user
code or master code. Instead of the user code, you can
also point a chip key to the control unit.
9.1 Blocking
zones
This enables you to block (hide) individual zones to
remove them from surveillance. The zone is blocked once
only (for the next active monitoring period – i.e., until the
next deactivation) and, if required, must be blocked again
the next time you activate the alarm system. Proceed as
follows:
Enter a valid user code. The LCD display shows:
remove them from surveillance. The zone is blocked once
only (for the next active monitoring period – i.e., until the
next deactivation) and, if required, must be blocked again
the next time you activate the alarm system. Proceed as
follows:
Enter a valid user code. The LCD display shows:
Press:
.
The control unit shows:
Now enter the two-digit zone number of the zone you want
to block (i.e., remove from surveillance).
Press:
.
The control unit shows:
To block further zones, enter their numbers. To unblock a
zone, re-press the
key.
To quit the display, press the following key:
.