ABUS AZ4111 ユーザーズマニュアル

 

 

18

UK 

 
The installer can program the alarm centre so that it 
behaves like 4 separate alarm centres. The partitions are 
called partition A, B, C and D. These can be switched 
active or inactive independent of each other. Several 
partitions can be switched active or inactive 
simultaneously; this is set by the installer.

 

 

In partitioned systems, buttons 

, 

, 

 and 

 have the 

following functions: 
 
Button

 

 

A 

Active / inactive Partition A

 

B 

Active / inactive Partition B

 

C 

Active / inactive Partition C

 

D 

Active / inactive Partition D

 

 

1. Enter your user code via the keyboard or hold your 
proximity code key at the control unit. If no other partition 
is active then the display shows: 
 
 
 
 
 
 
If another partition is active then the display shows: 
 
 
 
 
 
 

2. Press the required partition button. The display shows: 
 
 
 
 
 
 
3. Press 

. 

The display shows which partition the alarm centre is 
currently activating and the time until completion of the 
process. A beep is emitted at the control unit if this has 
been programmed.

 

After completion of the time, the alarm centre sets the 
partition to active and the control unit shows which 
partition is switched to active. 
 

The entry time starts when you open the entry door. An 
intermittent beep is sounded during the entry time.

 

 
1. Enter your user code or hold your proximity code key at 
the control unit. The display shows the partitions that you 
can enter. 
 
 
 
 
 
 
2. Press the corresponding partition button 

, 

, 

 or 

 

and then press 

. 

The entry beep stops. The partition is now deactivated.