ABUS AZ4111 ユーザーズマニュアル

 

 

16

UK 

Your alarm system can be programmed so that some 
zones trigger a tone when entered. To activate/deactivate 
the door chime for these zones:

 

 
Enter your user code. 
 
The control unit shows: 
 
 
 
 
Press 

. 

 
The control unit shows: 
 
 
 
 
To toggle between on and off, press 

 again. 

 
To confirm the setting, press 

 

 
When the setting is saved, the alarm centre confirms with 
a double tone and shows the date and time again. 
 

You can test all connected acoustic and visual signalling 
devices. Proceed as follows:

 

 
Enter your user code. 
 
The control unit shows: 
 
 
 
 
Press 

. 

 
The control unit shows: 
 
 
 
 
The alarm centre now tests in this order the outputs 
marked as sirens, the outputs for the flashlight, the output 
for the loudspeaker, and the control unit. At the end of the 
test, the alarm centre emits with a double tone and shows 
the date and time again.

 

 

 
You can make a walk test to check that all sensors are 
working properly. However, make sure that nobody else 
can trigger a sensor during the test, since this would result 
in a false test evaluation. 

 

 
Enter your user code. 
 
The control unit shows: 
 
 
 
 
 
Press 

.