Texas Instruments CC2650DK ユーザーズマニュアル
![Texas Instruments](https://files.manualsbrain.com/attachments/b46f99d826b2b0e0e5f558c5fb6483942eb9216b/common/fit/150/50/c15ea36eb1fb1cce99a3b94668675bfc78ce832d8d727d9a7bb51a125510/brand_logo.gif)
UART
DMA Channel 2 SREQ
DMA
DMA done CH2
DMA done CH1
DMA Channel 2 REQ
DMA active CH2
DMA Channel 1 SREQ
DMA Channel 1 REQ
DMA active CH1
Event
UART0_TX_DMASREQ
UART0_TX_DMABREQ
DMA RX Clear
DMA TX Clear
DMA Channel 14 REQ
UART0_TX_DMASREQ
UART0_TX_DMABREQ
UART Interrupt
Controller
UART DMA
Controller
UART Interrupt
CPU
Initialization and Configuration
Figure 19-3. µDMA Example
19.6 Initialization and Configuration
The UART module provides four I/O signals to be routed to the pads. The following signals are selected
through the [IOCFGxx] registers in the IOC module.
through the [IOCFGxx] registers in the IOC module.
The UART module provides four I/O functions to be routed to the pads:
•
Inputs: RXD, CTS
•
Outputs: TXD, RTS
CTS and RTS lines are active low.
NOTE:
IOC must be configured before enabling UART, or unwanted transitions on input signals may
confuse UART on incoming transactions. When IOC is configured as UART-specific I/Os
(RXD, CTS, TXD, or RTS), IOC sets static output driver enable to the pad (output driver
enable = 1 for output TXD and RTS and output driver enable = 0 for inputs RXD and CTS).
(RXD, CTS, TXD, or RTS), IOC sets static output driver enable to the pad (output driver
enable = 1 for output TXD and RTS and output driver enable = 0 for inputs RXD and CTS).
1334
Universal Asynchronous Receivers and Transmitters (UARTS)
SWCU117A – February 2015 – Revised March 2015
Copyright © 2015, Texas Instruments Incorporated