Reely RtF 400 mm WACO ユーザーズマニュアル
製品コード
WACO
48
If the control stick for the elevator function (see figure 2, item 4) is moved up, the elevator must deflect to the top. The
rear rudder edge must be deflected downwards by approx. 4 - 5 mm. In flight, the landing gear is pressed upwards and
the model dives. This control function is required to put the model into a normal light position if it wants to ascend too
much due to a control error or a gust of wind.
rear rudder edge must be deflected downwards by approx. 4 - 5 mm. In flight, the landing gear is pressed upwards and
the model dives. This control function is required to put the model into a normal light position if it wants to ascend too
much due to a control error or a gust of wind.
Figure 14
Rudder Function (Mode 1 and 2)
If the control stick for the rudder function (see figure 2, item 12) is moved to the left, the elevator must deflect to the left.
The rear rudder edge must be deflected to the left by approx. 6 - 7 mm. In flight, the landing gear is pressed to the right
and the model flies to the left.
The rear rudder edge must be deflected to the left by approx. 6 - 7 mm. In flight, the landing gear is pressed to the right
and the model flies to the left.
Figure 15
If the control stick for the rudder function (see figure 2, item 12) is moved to the right, the elevator must deflect to the
right. The rear rudder edge must be deflected to the right by approx. 6 - 7 mm. In flight, the landing gear is pressed to
the left and the model flies to the right.
right. The rear rudder edge must be deflected to the right by approx. 6 - 7 mm. In flight, the landing gear is pressed to
the left and the model flies to the right.
Figure 16