Sygonix Surveillance Camera 43195C 43195C ユーザーズマニュアル

24

The home technology brand for the entire house. More information at www.sygonix.com

•  First, mark the mounting position on the wall through the fastening holes in the wall bracket, if 

you need to drill holes to secure the wall bracket.

   Also, if necessary, drill a hole in the wall large enough to thread the connection cable through.
   Please ensure that no cables or wires are damaged when drilling.
•  Now mount the retaining plate, which is corrugated in the 

middle, underneath the camera. 

   For this purpose, use 2 short screws and a total of 4 wash-

ers.

   Push the cable from the curved side out through the re-

taining plate.

  See the correct orientation in the image to the right.
   Put 2 washers on each of the two short screws. Then at-

tach the plate to the camera from beneath.

•  Push the cable through the L-shaped wall bracket. 
•  Attach the camera with 4 short screws to the wall bracket

 

(don‘t use washers!).

•  Either lead the connection cable sideways out of the wall bracket or put it through an existing 

hole in the wall, where you want to mount the wall bracket. 

  In the process, protect the plug against dust and dirt, e.g. with a small plastic bag.
•  Screw the wall bracket with the camera mounted on it securely against the wall. Use screws 

and, if necessary, suitable dowels, depending on the wall. 

   Should the 4 long screws and 4 screw anchors provided in this package suit your existing wall, 

put a washer on each screw before screwing it into place.

•  If the sun protection is provided separately, secure it on the top of the camera with 2 screws.
•  To adjust the position of the camera, use the Allen key to loosen the wall bracket a bit. Use the 

Allen key provided for this purpose. Adjust the camera position and secure the screws again.