Siemens SPS starter kit 6ED1057-3BA00-0AA8 12 Vdc, 24 Vdc 6ED1057-3BA00-0AA8 データシート
製品コード
6ED1057-3BA00-0AA8
Reference material
5.3 Special functions
LOGO!Soft Comfort Online Help
220
Operating Instructions, 06/2014
Timing diagram
Description of the function
A 0 to 1 transition at input Trg sets output Q to 1 instantaneously.
At the 1 to 0 transition at input Trg, LOGO! retriggers the current time T, and the output
At the 1 to 0 transition at input Trg, LOGO! retriggers the current time T, and the output
remains set. LOGO! resets the output Q to 0 when T
a
reaches the value specified in T (T
a
=T)
(off delay).
A one-shot at input Trg retriggers the time Ta.
You can reset the time Ta and the output via the input R (Reset) before the time Ta has
A one-shot at input Trg retriggers the time Ta.
You can reset the time Ta and the output via the input R (Reset) before the time Ta has
5.3.1.3
On-/Off-delay
Short description
The on-/off- delay function block can set an output after a configured on-delay time and then
reset it again upon expiration of a second configured time.
Connection
Description
Input Trg
You trigger the on-delay with a positive edge (0 to 1 transition) at input Trg
(Trigger).
You trigger the off-delay with a negative edge (1 to 0 transition).
Parameter
T
H
is the on-delay time for the output (output signal transition 0 to 1).
T
L
is the off-delay time for the output (output signal transition 1 to 0).
Retentivity on = the status is retentive in memory
Output Q
Q switches on upon expiration of a configured time T
H
if Trg is still set. It
switches off again upon expiration of the time T
L
and if Trg has not been set
again.