VIZIO TL-WR641G ユーザーズマニュアル

 

 

- 37 - 

¾

  Default Gateway - (Optional.) Suggest to input the IP address of the LAN port of the 

router, default value is 192.168.1.1 

¾

  Default Domain - (Optional.) Input the domain name of your network. 

¾

  Primary DNS - (Optional.) Input the DNS IP address provided by your ISP. Or consult 

your ISP. 

¾

  Secondary DNS - (Optional.) Input the IP address of another DNS server if your ISP 

provides two DNS servers. 

)

To use the DHCP server function of the router, you must configure all computers on the LAN as 

"Obtain an IP Address automatically" mode. This function will take effect until the router reboots. 

This page shows Client Name, MAC Address, Assigned IP, and Lease Time for each DHCP 

Client attached to the router (Figure 4-25): 

 

Figure 4-25 

¾

  Index - The index of the DHCP Client   

¾

  Client Name - The name of the DHCP client   

¾

  MAC Address - The MAC address of the DHCP client   

¾

  Assigned IP - The IP address that the router has allocated to the DHCP client. 

¾

  Lease Time - The time of the DHCP client leased. Before the time is up, DHCP client will 

request to renew the lease automatically. 

You cannot change any of the values on this page. To update this page and to show the 

current attached devices, click on the Refresh button. 

When you specify a reserved IP address for a PC on the LAN, that PC will always receive the 

same IP address each time when it accesses the DHCP server. Reserved IP addresses should 

be assigned to servers that require permanent IP settings. This page is used for address 

reservation (shown in Figure 4-26 ).