Siemens AT Command Set Cellular Engines Wireless Modules MC35 ユーザーズマニュアル
AT Command Set
MC35_ATC_01_V04.00
Page 189 of 238
02.04.2002
8.13 AT^SLCK Facility lock
Test command
AT^SLCK=?
Response
^SLCK: (list of supported <fac>s) OK
Parameter
See write command
Write command
AT^SLCK=
<fac>,<mode>
[,<passwd>
[,<class>]]
<fac>,<mode>
[,<passwd>
[,<class>]]
Response
This command is used to lock, unlock or interrogate a ME or a network facility
<fac>.
The command can be aborted while network facilities are being set or interro-
gated.
<fac>.
The command can be aborted while network facilities are being set or interro-
gated.
If <mode><>2 and command is successful
OK
If <mode>=2 and command successful
^SLCK: <status>[,<class1>[<CR><LF>
^SLCK: <status>, class2....]] OK
If error is related to ME functionality:
+CME ERROR: <err>
OK
If <mode>=2 and command successful
^SLCK: <status>[,<class1>[<CR><LF>
^SLCK: <status>, class2....]] OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
<fac> Phone security locks set by user / provider
“PS” Phone locked to SIM card (phone code). ME requests password
when other than current SIM card inserted; ME may remember
certain number of previously used cards thus not requiring pass-
word when they are inserted.
certain number of previously used cards thus not requiring pass-
word when they are inserted.
“SC” SIM (lock SIM cards). SIM requests password upon ME power-up
and when this lock command issued.
“FD” SIM fixed dialling memory: If the mobile is locked to FD, only the
numbers stored to the FD memory can be dialled (up to 7 num-
bers). If PIN2 authentication has not been performed during the cur-
rent session, PIN2 is required as <passwd>.
bers). If PIN2 authentication has not been performed during the cur-
rent session, PIN2 is required as <passwd>.
"CS" Keypad lock (not supported since keypad cannot be connected)
Supplementary Service: Call barring
“AO” BAOC (Bar All Outgoing Calls)
“OI”
“AO” BAOC (Bar All Outgoing Calls)
“OI”
BOIC (Bar Outgoing International Calls)
“OX” BOIC-exHC (Bar Outgoing International Calls except to Home
Country)
“AI”
BAIC (Bar All Incoming Calls)
“IR”
BIC-Roam (Bar Incoming Calls when Roaming outside the home
country)
country)
“AB” All Barring services (applicable only for <mode>=0)
“AG” All outGoing barring services (applicable only for <mode>=0)
“AC” All inComing barring services (applicable only for <mode>=0)
“AG” All outGoing barring services (applicable only for <mode>=0)
“AC” All inComing barring services (applicable only for <mode>=0)
Factory set facility locks:
“PF”
“PF”
lock Phone to the very First SIM card
“PN” Network Personalisation
“PU” Network subset Personalisation
“PP” Service Provider Personalisation
“PC” Corporate Personalisation
“PU” Network subset Personalisation
“PP” Service Provider Personalisation
“PC” Corporate Personalisation