Siemens AT Command Set Cellular Engines Wireless Modules MC35 ユーザーズマニュアル

AT Command Set

MC35_ATC_01_V04.00

Page 200 of 238

02.04.2002

8.26 AT^SNFV Set loudspeaker volume

Test command

AT^SNFV=?

Response

^SNFV: (list of supported

<outStep>s) OK

Parameter

See write command

Read command

AT^SNFV?

Response

^SNFV: <outStep>
OK

Parameter

See write command

Write command

AT^SNFV=<out
Step>

Response

TA sets the volume of the loudspeaker to the value <outCalibrate> addressed by
<outStep>.
OK

Parameter

<outStep>

Volume range 0 to 4

Reference

Siemens

Note

• Read and write commands are related to the active audio mode.

• The changes are allowed in audio modes 2 to 6.

• <outStep> can be changed by AT^SNFO, too.

• <outCalibrate> can be changed by AT^SNFO.

• AT^SNFW does not save the changed <outStep> value. The setting will be

saved when you switch off the module with AT^SMSO.

8.27 AT^SNFW Write audio setting in non-volatile store

Test command

AT^SNFW=?

Response

Execute command

AT^SNFW

Response

TA writes the active audio parameters in non-volatile store related to the active
mode.
OK
If error is related to ME functionality:
+ CME ERROR: <error>
<error> memory failure Flash write error

Reference

Siemens

Note

• Execute command works only in audio mode 2 to 6.

• TA writes the following audio parameter values in non-volatile store: