SharkRack KVM-8 ユーザーズマニュアル

KVM-8 Installer/User Guide

14

On-Screen Display Operations

15

Activate on-screen display (OSD) by pressing either of the keyboard Control keys 

twice within one second. In non-secure mode, this brings up the main OSD Window, 

“Administrator Channel List.”
In secure mode, activating OSD will bring up the “User Login” window. Type in your 

user name and press Enter. The system administrator should login as “Admin”, “Root” 

or “Administrator.” Type your password and press Enter. This will bring up your 

“Channel List.” If there is no keyboard activity, the login window will timeout after 

five minutes and go blank to allow the monitorʼs energy saver to execute. Enter your 

OSD activation sequence to restore the login prompt.

Note: All KVM Switch units ship in the default non-secure state. For more information on secure 
versus non-secure operation, see the section “Administrator Functions.”

This window lists all named channels in your KVM Switch system. They will be listed 

alphabetically with their channel addresses and access status beside them. Beside the 

address there will be a small circle. If the circle is filled, the computer in question is 

powered on. When in secure mode, only the channels that are accessible to the logged in 

user will be listed. (See the section “Administrator Functions” for more information.)

Use your up and down arrow keys and the page up and page down keys to select a 

channel. Move immediately to the top or bottom of the list with the home and end keys. 

Press a letter while in the main OSD window, and the Highlight Bar moves to the first 

channel name beginning with that letter. Press the letter repeatedly to scroll through 

all channels that begin with that letter from top to bottom. Press Enter to make the