SharkRack KVM-8 ユーザーズマニュアル
KVM-8 Installer/User Guide
12
Basic Operations
13
Press Enter to accept the new channel. The following command line shows the proper
format used to switch your active channel via keyboard.
Key Sequence
Action
<CM>Addr<Enter>
Selects an active channel via keyboard
Below is a sample of a keyboard switching session, with an accompanying explanation
for each step.
Key Sequence
Action
1. <CM>4<Enter>
Selects channel 4 on the base unit as the active channel.
2. <CM>3<Enter>
Selects the KVM Switch attached to channel 3 on the base
unit, then selects channel 5 on the cascaded unit.
unit, then selects channel 5 on the cascaded unit.
3. <CM>6<Enter>
Selects channel 6 on the base unit as the active channel.
4. <CM>21<ESC>
Exit Command Mode. The instruction is not executed.
channel 6 is still the active channel.
channel 6 is still the active channel.