Procom CGA7740N ユーザーズマニュアル

Getting started

6

Connect the other end of the supplied line cord to the ADSL filter 
then connect the ADSL filter to the telephone socket

Then click on Continue
• A progress bar screen will be displayed
Select your country and Internet Service Provider (ISP) using the 
information provided by your ISP

If your ISP is not in the default list, please select "Other".

Click on Continue
• A progress bar screen will be displayed, your parameters will be saved 

This screen is the Philips support site. It is a live Internet page, subject 
to change. The screen displayed may differ from the one shown.

Click on Menu if you want to go back to the menu screen
Tip

Your WiFi network is running but not secured.

Click on Set Encryption

At any time you can retrieve your wireless security settings using your 
installation CD ROM on the computer where you installed your 
gateway and by clicking on the security icon 

 of the menu page.

If you want to install a WiFi device you have to retrieve your wireless 
security settings using your installation CD ROM on the computer 
where you installed your gateway and by clicking on the security icon 

 of the menu page.

3.3.1 Install a Wireless USB adapter CCU7740N
If you have bought the starter kit CKA7740N, the Wireless USB 
adapter CCU7740N is part of the box content. In that case you just 
have to insert the installation CD ROM, provided with your 
CKA7740N, and follow the instructions on the screen.

Refer to the manual of the other WiFi device
Note

If you have previously secured your network (see 3.2 step 13) through 
the easy installation, the name of your network (SSID) will be 
"PHILIPS_xxxxxx".
If not secured previously through the easy installation, the SSID will be 
"philips_install".
In case you have given another name to your network, bear in mind that  
this name will be displayed instead of the "PHILIPS_xxxxxx" or 
"philips_install".

At any time you can retrieve your wireless security settings using your 
installation CD ROM on the computer where you installed your 
gateway and by clicking on the security icon 

 of the menu page.

You can install another WPS device on your network in any of the three 
following ways :

Check that your Wireless router and that the other WPS device are 
connected and ON
On your Internet Browser, enter http://192.168.

2.1 in the address 

field and click on GO to access the webpages
Click on the WIRELESS tab on the left side of the page and select 
PIN to open the corresponding subpage
Enter the PIN from the client device (the other WPS device) and 
click START PIN
• The other WPS device is installed on your network

10

11