PictureTel LIVE GATEWAY 3.1 ユーザーズマニュアル

 

This guide describes how to install and configure version 3.1 of PictureTel LiveGateway on Microsoft ® 
Windows NT servers. It is intended for anyone who installs this product.  This guide assumes that you are 
familiar with installing PC add-on boards, installing and using Microsoft Windows NT applications, and 
connecting computers to peripheral equipment. It also assumes that you have Integrated Services Digital 
Network (ISDN) experience.   

The PictureTel LiveGateway 3.1 product kit contains a full-length ISA/EISA LiveGateway board, an ISDN 
cable, a bootup diagnostic diskette, and the LiveGateway software (on the CD-ROM). 

Note: If you are also using the PictureTel LiveManager gatekeeper product on your network, you must use 
version 3.1 of LiveManager. Earlier versions of LiveManager will not work with LiveGateway 3.1. 

The LiveGateway installation-related information is presented into the following sections. Click on a topic to 
obtain information about it.  

To minimize network traffic, you should install LiveGateway on a network segment with a high concentration 
of LiveLAN clients. To minimize the effects of network traffic on the LiveLAN clients, you can allocate 
specific amounts of network resources to be used for LiveGateway and LiveLAN calls.  

For support or service, please contact your PictureTel sales representative or call PictureTel Technical Support. 
Refer to the PictureTel web site, www.picturetel.com, to find the appropriate Technical Support phone number 
for your geographical location.