Ohaus ohaus indicator cd-11 ユーザーズマニュアル

Press the G/N/T/

Menu 

button, LStOFF is displayed.  This permits locking the

SEtuP menu. LStOFF is unlocked, LSt On is read only (locked).  This menu is
hidden if the CAL jumper is off.

Press the     PRINT/

Units 

button for selections LSt ON or LStOFF.

Press the G/N/T/

button, LrdOFF displayed.  This permits locking the rEAd

menu. LrdOFF is unlocked, Lrd On is read only (locked).

Press the PRINT/

Units 

button for selections Lrd On or LrdOFF.

Press the G/N/T/

     button, LPtOFF is displayed.  This permits locking the

Print menu. LPtOFF is unlocked, LPtOn is read only (locked).

Press the PRINT/

Units 

button for selections LPtOn or LPtOFF.

Press the G/N/T/

Menu 

button, LCLOFF is displayed.  This permits locking the

Calibration menu. LCLOFF is unlocked, LCL On is read only (locked).  This
menu is hidden if the CAL jumper is off.

Press the PRINT/

Units 

button for selections LCL On or LCLOFF.

Press the G/N/T/

Menu 

     button to end this block, SAVE is displayed.

Press the G/N/T/

Menu 

button to save the lockout menu settings.  The next

menu Quit is displayed.

or

Press the PRINT/

 button to go back to the lockout menu without saving.

After saving the lockout menu settings, press the PRINT/

Units 

button to go to

CAL or press the G/N/T/

Menu 

button to return to a weighing mode.

NOTE:  At this point, the Indicator must be calibrated and the jumper removed
from the CAL connector in order to lock the menus. The top cover of the Indica-
tor should be free to gain access to the CAL jumper.

*