Manualsbrain.com
  1. マニュアル
  2. ブランド
  3. Honeywell
  4. VCR DCP200
  5. ユーザーズマニュアル

Honeywell VCR DCP200 ユーザーズマニュアル

ダウンロード
ページ / 184
DCP200 Profile Controller & Recorder - Product Manual
Page 64
Configuration & Use
51-52-25-150, Issue 1 – April 2009
Table 24. Product Information Screens
Product Information Mode:
Input Calibration Status
Calibration status of the mVDC, VDC, mADC, RTD and 
Thermocouple CJC inputs. 
Caution:
Re-calibrate the unit if any inputs 
are not shown as “Calibrated”.
Calibration Check Due 
Date
The date re-calibration is due. – Only shown if the Calibration 
Reminder is enabled in the Input Configuration menu.
Option Slot n
Information
The type of Option Modules (if any) fitted in Option Slot s 1 to 4 and A 
to C.
Controller Feature 
Information
Shows the features fitted/enabled in the instrument:
Controller Only; USB Port; Data Recorder (includes USB Port) or 
Profiler.
Firmware Information
The type and version of firmware installed in the instrument.
Serial Number
The instruments serial number.
Date of Manufacture
The instrument’s Date of Manufacture
Service Information Mode
This is a read only mode. It provides contact information to the user about where they can 
obtain service, sales or technical support for the product. Normally this shows either the 
manufacturer or supplier details. Using the PC software, the user can enter their own details. 
There are 7 lines of text - each up to 26 characters in length.
Navigating Product Information Mode
There are no other screens in this mode.
Hold down 
and press 
to return to the Main Menu
Table 25. Service Contact Information Screen
Service Information Mode:
For Service Contact
Contact information for Service, Sales or Technical Support.