Honeywell VCR DCP200 ユーザーズマニュアル

DCP200 Profile Controller & Recorder - Product Manual

Page 66

Data Recorder

51-52-25-150, Issue 1 – April 2009

The features covered in this section are available on models fitted with the Data Recorder 
option. This option includes a USB Interface (refer to section 8) and a Real Time Clock (RTC)
with battery backup..

The Data Recorder option allows the user to make a recording of the process over time. 
Recordings can be transferred to a memory stick using the USB Port.

Recordings are stored in Comma Separated format (.csv), suitable for use with 
spreadsheets, or for import in to other software. See the USB Memory Stick Folders & Files 
details (in section 8) for file information.

A Recorder Configuration sub-menu is added to the Configuration Menu and Recorder 
Control can be optionally added to the Main Menu or Operation Mode. The RTC also 
expands the profiling capabilities (refer to section 10) and allows a “calibration due” reminder 
to be shown at a date specified by the user.

The Data Recorder adds the option for a Calibration Reminder and a % memory use bar 
graph to the Operation Mode screen sequence.

A "calibration due reminder" can be shown if the date is equal to or after the Calibration 
Reminder Date. The reminder screen persists until the 



key is pressed. If due, the reminder 

is shown at Power-up, and repeated every 24hrs until the reminder date is changed.
The Calibration Reminder enable/disable and Reminder Date parameters can be set from
the Input Configuration Menu.

The bar-graph shown in the main Operation Mode screen can be set to show 0 to 100% of 
recorder memory used instead of the standard options of PID power or control deviation. The 
Bar Graph Format is defined in the Display Configuration Menu.