Fujitsu CONNECT2AIR AP-600RP-USB ユーザーズマニュアル

Inform WLAN AP-600RP-USB Configuration schemes Issue October 16

2003

Page 2 of 6

AP-600RP-USB with ADSL Router

( 1 ) ADSL Router

( 2 ) AP-600RP-USB

( 3 ) Notebook

WAN:

PPPoE over ADSL

LAN:

static IP: 192.168.1.1

DHCP

on: 192.168.1.10 - 90

GW:

192.168.1.1

DNS:

auto

WAN:

no ISP

LAN:

static IP: 192.168.1.254

DHCP disabled
Routing: off (cable from Router

connected to the LAN

interface)
SSID: CONNECT2AIR

TCP/IP:

get IP and DNS

address

automatically
SSID: CONNECT2AIR
Data Rate: auto

Connecting the devices to the AP-600RP-USB:

Connect the ADSL Router to one of the LAN port, not to the WAN port. Additional networking devices like network
printers, servers or scanners can be plugged to one of the free LAN ports and will be integrated in the IP segment of
192.168.1.X.

Installation Note

The AccessPoint as well as the ADSL Router have routing capabilities. Therefore it is suggested to operate the
AccessPoint only as a Wireless Bridge. Connecting the ADSL Router to one of the LAN ports will put the AccessPoint
into the bridging mode. The network management will therefore be handled by the ADSL Router.

ADSL Router:
- DHCP Server
- managing the PPPoE session

AP-600RP-USB:
- handling the wireless LAN (WLAN) access