Fujitsu CONNECT2AIR AP-600RP-USB ユーザーズマニュアル

 
 

Inform ‚ WLAN ‚ AP-600RP-USB Configuration schemes ‚ Issue October 16

 
 
Page 3 of 6 
 

 

 

 

 

WAN:  

PPPoE over ADSL  

LAN:  

static IP: 192.168.1.1 

DHCP  

on: 192.168.1.10 - 90 

 GW: 

192.168.1.1 

 DNS: 

auto 

 

 

WAN:  

dynamic IP address 

LAN:  

static IP: 192.168.4.254 

DHCP on: 

192.168.4.10 - 90 

 GW: 

192.168.4.254 

 DNS: 

auto 

Routing:  on (cable from Router  
 

connected to the WAN 

 interface) 
SSID: CONNECT2AIR 

 

 

TCP/IP:  

get IP and DNS 

 address 

 

 automatically 
SSID: CONNECT2AIR 
Data Rate:  auto 

 
 

 

 

 

 
Both the AccessPoint as well as the ADSL Router have routing capabilities. This case describes using both devices in 
the router mode in order to have the full feature set of the AccessPoint active, like the Firewall, NAT or the packet 
forwarding service.  
Important: The IP segment of the ADSL Router has to be different from the one of the AccessPoint, otherwise the APs 
Router will not work properly. Due to production process, the third IP segment of the AccessPoint must be different to 
192.168.2.X, as the default WAN settings for “static IP address” is set to 192.168.2.1 . 
 
 
ADSL Router: 
- DHCP Server (on or off) 
- managing the PPPoE session 

AP-600RP-USB: 
-  DHCP Server 
-  handling the wireless LAN (WLAN) access 
-  NAT Routing, Firewall are active