Falcon MONITORING F110 ユーザーズマニュアル

www.rletech.com

23

970.484.6510

3

  F110 Web Interface

Many email servers block SMTP email by default. To use SMTP email with the F110, be sure 

the F110 IP address is added to the list of allowed SMTP relay hosts on the email server you 

are using for email.

After you make a field change, click on Accept Changes at the bottom of the screen, after 

verifying the settings are ok, click on the Save Settings tab located on the left hand column.

The SNMP tab stores settings allowing the F110 to respond to SNMP Query requests from 

network monitoring applications. Enter the 'Community Name' to use for accessing the SNMP 

data via SNMP Query for the F110 sensors. If the SNMP feature of the F110 is used, F110 MIB 

files are available for download on the Documentation/Files section of the F110 webpage at 

, or by contacting RLE via 

support@rletech.com

.

The F110 can also send SNMP Traps in response to alerts. Enter up to three (3) IP addresses on 

the SNMP tab and F110 will send SNMP Traps to these systems for processing by network 

monitoring applications.

Figure 3.5 SNMP Settings

After you make a field change, click on Accept Changes at the bottom of the screen, after 

verifying the settings are ok, click on the Save Settings tab located on the left hand column.