Zephyr ZSAM90C オーナーマニュアル

www.zephyronline.com

Ductless recirculation is intended for applications where an exhaust duct work is not possible to be installed. 
When converted, the hood functions as a recirculating hood rather than an exhaust hood. Fumes and exhaust 
from cooking are drawn and fi ltered by a set of optional charcoal fi lters. The air is then purifi ed and re-
circulated back within the home.

We recommend to ALWAYS exhaust air outside of the home by employing existing or installing new duct 
work, if possible. The hood is most effective and effi cient as an exhaust hood. Only when the exhaust option 
is not possible should you recourse to converting the hood into a recirculating hood.

When converted to be a recirculating hood, a set of charcoal fi lters are required on top of its standard mesh 
fi lter set. Order according to its part number below. The standard mesh fi lters are intended to capture residue 
from cooking and the optional charcoal fi lters help to purify fumes exhausted from cooking for re-circulation.    

Kit includes charcoal fi lters and air diverter plate.

ZSA 

    ZRC-00SV   

 

         2 

1.   Purchase recirculating kit per the part number above

2.   Secure air diverter plate to wall below duct cover bracket. Run 6” 

ducting from top of hood and secure to air diverter plate. (FIG. B)

3.  Remove aluminum mesh fi lters from hood. Secure charcoal fi lter 

brackets to the hood body behind each mesh fi lters using the screws 
included in the recirculating kit.  Clip charcoal fi lters onto each charcoal 
fi lter bracket.  (FIG. B)

4.   Re-Install  mesh fi lters. For more details refer to manual included 

5.  Charcoal fi lters must be replaced after every 120 hours of use (or 

approximately every 3 to 4 months based on an average of 1 - 2 hrs. of 
daily cooking time).

ZSA 

 

Z0F-C002   

   2

DO NOT WASH CHARCOAL FILTERS.  Charcoal fi lters may need
to be changed more often depending on cooking habits.