Frigidaire FGHB2866P オーナーマニュアル

15

(∧ or ∨)

Used to enter and exit the options 

menu and make selections.

Toggles the options and run modes.

While in the locked state, you will not 

be able to change any settings on the 

display nor dispense ice and water. The 

“Control Locked” indicator will flash and

an audible warning tone is played.

Activates a faster rate for freezing food 

and increases ice production in the 

freezer. Deactivates after 12 hours.

Toggles the ice maker “ON” or “OFF”. In 

the “Ice Off” state, indicator will blink 

when ice is dispensed.

Toggles the temperature displays On 

and Off.

Allows the temperature set-points to be 

adjusted. Control temperatures range 

from +33° F / +1° C to +47° F / +8° C.

Allows the temperature set-points to be 

adjusted. Control temperatures range 

from -6° F / -21° C to +6° F / -15° C.

mode ° F ° C Toggles display from Fahrenheit to Celsius.
light

Toggles dispenser light On and Off.

Press and hold for three seconds 

to turn off the cooling system. It 

also turns off the ice maker and all 

dispenser functions. The display will 

read “power off”.

Displays the current status of the water 

filter (Good, Order, or Replace). To reset

the filter status to “Good”, press and

hold the “set” key for three seconds.

Displays the current status of the air 

filter (Good, Order, or Replace). To reset

the filter status to “Good”, press and

hold the “set” key for three seconds.

While in the default option, press and 

hold the set key for three seconds to 

reset all refrigerator settings to their 

factory default settings.

Selects the current menu selection option.

Press the “water” key to select water. A 

green indicator light will be illuminated 

above the active feature.

Press the “cube” key to select cubed 

ice. A green indicator light will be 

illuminated above the active feature.

Press the “crush” key to select crushed 

ice. A green indicator light will be 

illuminated above the active feature.