Gaggenau AR400742 インストールガイド

9

READ AND SAVE THESE INSTRUCTIONS

Risk of electrical shock or fire
Frame grounded to neutral through a ground strap. 
Grounding through the neutral conductor is prohibited 
for new branch-circuit installations (1996 NEC), mobile 
homes, and recreational vehicles, or in an area where 
local codes prohibit grounding through the neutral 
conductor.
For installations where grounding through the neutral 
conductor is prohibited,
a)

disconnect the link from the neutral,

b)

use grounding terminal or lead to ground unit,

c)

connect neutral terminal to lead branch circuit 
neutral in usual manner (when the appliance is to 
be connected by means of a cord kit, use  a 
UL listed 4-conductor cord for this purpose). 

Before you plug in an electrical cord or turn on power 
supply, make sure all controls are in the OFF position.

If required by the National Electrical Code (or Canadian 
Electrical Code), this appliance must be installed on a 
separate branch circuit.

To reduce the risk of fire or electric shock, do not use 
this fan with any solid-statespeed control device.

Installer – show the owner the location of the circuit 
breaker or fuse. Mark it for easy reference.

Before installing, turn power OFF at the service panel. 
Lock service panel to prevent power from being turned 
ON accidentally.

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, 
OR INJURY TO PERSONS, OBSERVE THE 
FOLLOWING:
‒

Use this unit only in the manner intended by the 
manufacturer. If you have questions, contact the 
manufacturer.

‒

Before servicing or cleaning unit, switch power off 
at service panel and lock the service disconnecting 
means to prevent power from being switched on 
accidentally.
When the service disconnecting means cannot be 
locked, securely fasten a prominent warning device, 
such as a tag, to the service panel.

Be sure your appliance is properly installed and 
grounded by a qualified technician. Installation, 
electrical connections and grounding must comply with 
all applicable codes.

Risk of electric shock
Parts inside the appliance can have sharp edges. The 
connection cable can be damaged. Do not bend or 
pinch connection cables during installation.

Hidden surfaces may have sharp edges. Use caution 
when reaching behind or under appliance.

This appliance complies with the latest version of one or 
more of the following standards:

▯

UL 507 - Electric Fans

▯

CAN/CSA C22.2 No. 113 - Fans and Ventilators

It is the responsibility of the installer to determine if 
additional requirements and/or standards apply to 
specific installations.