Whirlpool WDF760SADM クイック設定ガイド

ページ / 48
15
Built-up floors: If the kitchen floor is higher than the cabinet 
opening's floor - for example, the kitchen floor tile does not 
extend into the cabinet opening - add shims as needed in the area 
shown to bring the dishwasher up to 34" (86.4 cm) below the 
countertop.
NOTE: Shims must be securely attached to floor to avoid 
movement when the dishwasher is in use.
Choose Attachment Option
Using 2 or more people, stand the dishwasher up.
IMPORTANT: The dishwasher must be secured to the cabinet. 
There are two brackets found in the parts bag. Attach the 
brackets using Option A if the countertop is wood, laminate or 
another similar surface. If your countertop is marble, granite or 
another hard surface, install using Option B.
Option A, Countertop Attachment
Remove the brackets from the package and insert into the open 
slots on the left and right-hand top of the dishwasher collar as 
shown.
Using a pair of pliers, bend the tab down to secure the bracket in 
place. Repeat this step for the other side.
NOTE: Do not attach the dishwasher. This will be done later.
Option B, Side Attachment 
For marble, granite, or other hard surface countertops
NOTE: Remove the brackets from the parts package.
Break off the end of the bracket along the scored line. 
With another person holding the rear of the dishwasher to keep it 
from tipping, open dishwasher door and place towel over pump 
assembly and spray arm of dishwasher. This will keep screws 
from falling into pump area when you are securing dishwasher to 
cabinet.
WARNING
Excessive Weight Hazard
Use two or more people to move and install 
dishwasher.
Failure to do so can result in back or other injury.