Whirlpool WDF760SADM クイック設定ガイド

Push the plastic buttons out of the side of the tub.
NOTE: Save the buttons to cover the holes after dishwasher is 
installed.

Push bracket into slot on the side of dishwasher, and bend tab in 
toward the side of the dishwasher so that it keeps the bracket in 
place. Repeat this step for the other side of the dishwasher.
NOTE: Do not attach the dishwasher. This will be done later.

NOTE: Do not install kick plate until instructed to do so.

IMPORTANT: Double-check correct placement of utilities. Grasp 
the sides of the dishwasher at the edges of the door panel. Tilt 
dishwasher backward on wheels and move dishwasher close to 
cabinet opening.
NOTE: Do not push on the front of the panel or on the console. 
Panel or console may dent.
Helpful Tip: Temporarily tape utilities to the floor in the locations 
shown to prohibit them from moving when dishwasher is moved 
into the cabinet opening.

Check that water line is on the left side of opening and drain hose 
is near the center of the cabinet opening.

With another person holding the dishwasher to keep it from 
tipping, open and close the door a few times. If the door closes or 
falls open under its own weight, the door tension will need to be 
adjusted.