Electrolux E32AR85PQS オーナーマニュアル

ページ / 24
6
Installation
This Use & Care Guide provides general 
installation and operating instructions 
for your model. We recommend using a 
service or kitchen contracting professional 
to install your appliance. Use the unit only 
as instructed in this Use & Care Guide. 
Before starting the appliance, follow 
these important first steps.
Location
•  Choose a place that is near a 
grounded, non-GFCI, electrical outlet. 
Do Not use an extension cord or an 
adapter plug.
•  If possible, place the unit out of direct 
sunlight and away from the range, 
dishwasher, or other heat sources.
•  The appliance must be installed on a 
floor that is level and strong enough 
to support a fully loaded unit.
Installation
•  Allow the following clearances 
for ease of installation, proper 
air circulation, and plumbing and 
electrical connections:
 
Sides  
⅜” (9.5 mm)
 
Top &Back  1” (25.4 mm)
•  Allow for trim kit if it to be installed 
with the unit.
CAUTION
DO NOT install the appliance  where the 
temperature will drop below 40°F (13°C) or 
rise above 110°F (43°C). The compressor 
will not be able to maintain proper 
temperatures inside the unit.
DO NOT block the toe grille on the 
lower front of your appliance. Sufficient 
air circulation is essential for the proper 
operation of your unit.
NOTE
If your appliance is placed with the door 
hinge against a wall, you may have to 
allow additional space so the door can 
be opened wider.
NOTE
The appliance doors are designed to 
shut by themselves within a 20-degree 
opening.
Required Tools
You will need the following tools:
Adjustable 
Wrench
Phillips™
Head or
#2 Square Drive
Head
(OR)
AND
OR
Socket
Wrench Set
Adjustable
Wrench
OR
Tools Necessary:
3/8" Fixed
Wrench
Phillips Head
or
#2 Square
Drive Head
(OR)
Tools Necessary:
and
or
or
Socket 
Wrench Set
Refrigerator
⅜” 
(10 mm)
⅜” 
(10 mm)