Electrolux E32AR85PQS オーナーマニュアル

8

To Level The Refrigerator:

While unit is lying on its back, note the 

location of the 4 leg levelers installed at 

each corner. These leg levelers will be 

used to level the refrigerator and to adjust 

the height. Use a carpenter’s level to level 

the refrigerator from front to back and side 

to side. Adjust the plastic leveling feet in 

front, ½ bubble higher, so that the door 

closes easily when left halfway open.

NOTE

Make sure to allow for the Trim and 

Leveling Kit if it is to be installed with 

the unit.

Plastic

Leveling Feet

Turn 

Left to 

Raise

Turn 

Right to 

Lower

Leveling Instructions For 

Matching Tall Refrigerator / Tall 

Freezer Pair:

•  Level door of first unit using all four 

levelers and slide unit into place. 

Recheck for levelness and adjust  

if necessary.

•  Measure distance from floor to 

bottom of door on first unit. Adjust 

and level second unit so door  

height matches.

        One full turn of all four leg levelers will  

        raise door 5/32”.

•  Slide second unit into place leaving a 

minimum gap of 3/16” between units 

for door swing clearance.

•  This last step may require at least 

one extraction of the second  

unit to properly align units in a  

“built-in” application. 

Leveling Door with  

Adjustable Hinge

Use the lower hinge adjustment to fine 

tune the door height and for final cabinet 

spacing. Use a 7/16” socket or wrench 

to adjust the screw at the bottom of the 

lower hinge.

Adjusting Doors For Matching Tall 

Refrigerator / Tall Freezer Pair

The doors may also be adjusted side to 

side with the slotted hinge for aligning 

the doors parallel to each other. Loosen 

the two bolts with a 

⅜” wrench and one 

screw with a Phillips screwdriver. Shift 

the doors until parallel, then retighten the 

screws securely. (See illustration below.)

Lower Hinge Adjustment For 

Leveling The Doors Of The 

Matching Tall Refrigerator / Tall 

Freezer Pair

To level the doors using the adjustable 

lower hinge (some models):
1.  If the refrigerator door is lower than 

the freezer door, raise the refrigerator 

door by turning the adjustment screw 

clockwise using a 7/16” socket 

wrench. (See illustration below.)

2.  If the freezer door is lower than the 

refrigerator door, raise the freezer 

door by turning the adjustment screw 

clockwise using a 7/16” socket 

wrench. (See illustration below.)

Door

Raise

Door

Raise

Door

Slotted Hinge

Adjustment

⅜”

 bolts

Freezer

Refrigerator

Screw

Door