Electrolux E32AR85PQS オーナーマニュアル

9

If door must be removed:

CAUTION

Doors are heavy. It is recommended to have 2 people remove or replace the door 

assembly from the cabinet.

•  Unplug the unit or switch the breaker 

that supplies power to the unit to the 

off position.

•  Remove the plastic top hinge cover.
•  Hold the door in place while removing 

the top hinge from the cabinet.

•  Remove the two 

⅜” hex head bolts 

from the top hinge with a 

⅜” wrench 

or socket.

•  Lift the door upwards and pull up and 

away from the cabinet until free of 

the bottom hinge pin mounted on the 

front of the cabinet.

•  To replace the door, reverse the above 

procedures and securely tighten all 

screws to prevent hinge slippage.

Hinge Cover

 

Hinge Bolts (2)

Hinge Plate

COOL DOWN PERIOD

For safe food storage, allow 4 hours for the appliance to cool down completely. The unit 

will run continuously for the first several hours.

CUSTOM SET™ ELECTRONIC CONTROL

The Custom Set™ Electronic Control is located inside the appliance. Temperature is 

factory preset to provide satisfactory food storage temperatures. However, the temperature 

control is adjustable to provide a range of temperatures for your personal satisfaction.

To adjust the temperature setting, press the UP (+) key for warmer temperature and 

DOWN (-) key for colder temperature on the control panel. Allow several hours for the 

temperature to stabilize between adjustments. The unit can be adjusted between 33°F 

(1°C) and 46°F (8°C). By pressing the TEMP MODE key, the temperature display will 

toggle between °F to °C.
To turn the appliance OFF, press the UP (+) key until the warmest temperature setting of 

46ºF (8ºC) show in the display. Then press the UP (+) key 3 times within 3 seconds to turn 

the unit OFF. The display will then scroll “OFF” across the display. To turn the unit back ON, 

press the DOWN key 3 times within 3 seconds. The control will then display “46ºF (8ºC)” 

and may be adjusted to the desired temperature.