Omron CPM2B ユーザーズマニュアル

Ensure that the CPM2B can be accessed for normal operation and mainte-
nance. High-voltage equipment, power lines, and moving machinery could be
dangerous if they are in the way during routine operations.

Up to 3 Expansion I/O Boards can be connected to a CPM2B CPU Board. The
following diagram shows how to assemble the Boards. The screws and stand-
offs are included with the CPU Board, Expansion I/O Board, and Mounting
Bracket.

Note Use M3 screws for the standoffs and tighten to a torque of 0.5 N

S

m.

Note The CPM2B-ATT01 Mounting Bracket is required

when the system must meet UL/CSA standards.

CPM2B-ATT01
Mounting Bracket
(See note.)

CPU Board

Four M3 standoffs (short)

Four M3 screws

Expansion I/O Board

Four M3 standoffs (long)

One CPM2B-CN601
Expansion I/O Cable

Mounting Bracket

Four M3 screws

Note Some of the CPM2B’s electrical components such as leads are sharp, so do not

touch the components or the surface of the circuit board.