Omron CPM2B ユーザーズマニュアル

1. Insert the Expansion I/O Cable into the connectors on the CPU Board and

Expansion I/O Board.

CPU Board

Expansion
I/O Board

Expansion I/O Cable
(included with the Expansion
I/O Board)

The cable from the CPU Board
connects to the upper Expansion
I/O Connector (the one with the
short locks.)

Install the shorter connector of
the cable in the lower Board and
the longer connector in the up-
per Board.

2. Push the cable’s connector into the Board’s connector until both lock levers

lock solidly.

Lock lever

To remove the Expansion I/O Cable, open the connectors lock levers and
pull out the cable’s connector.

Lock lever

Install the CPM2B as shown in the following diagram. The CPM2B cannot be
installed on DIN Track.

Four M4 screws

186

100