Patton electronic SmartNode 4110 Series ユーザーズマニュアル
PRI port configuration task list
200
SmartWare Software Configuration Guide
16 • PRI port configuration
Configuring HDLC Encapsulation
The hdlc encapsulation command specifies what kinds of upper layer data are contained in the hdlc frames.
Two encapsulation types are available, framerelay and ppp. For more details see Chapter 15,
Two encapsulation types are available, framerelay and ppp. For more details see Chapter 15,
Mode: hdlc
PRI Debugging
For the investigation of possible problems in link establishment, data transmission or synchronization, there
exists a debug command with the options ‘event’ and ‘error’. The command has a hierarchical characteristic
and can be applied to all ports of given type on the whole device, or to all ports of slot or just to one specific
port.
exists a debug command with the options ‘event’ and ‘error’. The command has a hierarchical characteristic
and can be applied to all ports of given type on the whole device, or to all ports of slot or just to one specific
port.
Step
Command
Purpose
1
[name] (hdlc)#encapsulation {framere-
lay | ppp}
lay | ppp}
Specifies the encapsulation type of hdlc.
Default: no encapsulation
Default: no encapsulation