Patton electronic SmartNode 4110 Series ユーザーズマニュアル
Call router configuration task list
497
SmartWare Software Configuration Guide
40 • Call router configuration
Creating call services
Routing tables, mapping tables and complex functions only manipulate address properties of a call (like the
called party number). A call service is another call router entity that actively accesses the state of a call. A call
service is able to spawn other calls or merge existing calls together. This allows building services like hunt
groups etc.
called party number). A call service is another call router entity that actively accesses the state of a call. A call
service is able to spawn other calls or merge existing calls together. This allows building services like hunt
groups etc.
You can view a call service as a virtual endpoint that accepts a call and creates new calls to other destinations. A
call that is routed to a call service is not served by a human being but by a machine that accepts the call and
performs needed actions.
call that is routed to a call service is not served by a human being but by a machine that accepts the call and
performs needed actions.
The hunt group service, for example, accepts a call that is routed to it and spawns a second call that is placed to
the first final destination. If this destination is not reachable, another destination is tried until one of the con-
figured destinations accept the call.
the first final destination. If this destination is not reachable, another destination is tried until one of the con-
figured destinations accept the call.
Creating a hunt group service
A hunt group service hunts an incoming call to multiple interfaces.
shows an example scenario where
a call from a SIP interface is first processed by several tables. The second table decides that the call must be for-
warded to the PSTN. The device is connected to the PSTN over four BRIs, which are bound to the context CS
warded to the PSTN. The device is connected to the PSTN over four BRIs, which are bound to the context CS
3
node(rt-tab)[tab-name]#exit
Leaves the routing table configuration mode and returns to
the context cs configuration mode
the context cs configuration mode
4
node(cts-cs)[ctx-name]#digit-col-
lection timeout 5 set-address-
complete-indication
lection timeout 5 set-address-
complete-indication
Configures the digit-collection timeout to 5 seconds and sets
the address-complete indication if the timeout elapses
the address-complete indication if the timeout elapses
5
node(cts-cs)[ctx-name]#digit-col-
lection terminating-char # set-
address-complete-indication
lection terminating-char # set-
address-complete-indication
Configures the terminating-character that can stop the digit-
collection timeout and immediately place the call to ‘#’ and
sets the address-complete indication if the character
is received
collection timeout and immediately place the call to ‘#’ and
sets the address-complete indication if the character
is received
Step
Command
Purpose