Sharp PG-C20X ユーザーズマニュアル

ON/OFF

POWER

LAMP

TEMP.

KEYSTONE

INPUT

BACK

ENTER

MENU

AUTO SYNC

2

1 Make the necessary connections before pro-

ceeding. Connect the power cord to a wall outlet.
The POWER indicator illuminates red and the
projector enters standby mode.

• If the side filter cover is not securely installed, the POWER

indicator flashes.

POWER

LAMP

TEMP.

ON/OFF

KEYSTONE

2 Press ON/OFF on the projector or POWER on the

remote control for over one second.

• The flashing green LAMP REPLACEMENT indicator shows

that the lamp is warming up. Wait until the indicator stops
flashing before operating the projector.

• The power cannot be turned off for one minute after the

power is turned on.

• If the power is turned off and then immediately turned on

again, it may take a short while before the lamp turns on.

• After the projector is unpacked and turned on for the first

time, a slight odor may be emitted from the exhaust vent.
This odor will soon disappear with use.

• Do not press any buttons before the startup image

disappears. Before “Adjusting The Image” appears, only
ON/OFF or POWER is available.

When the power is on, the LAMP REPLACEMENT indicator
lights indicating the status of the lamp.
Green: Lamp is ready.
Flashing green: Warming up.
Red: Change the lamp.

POWER

LAMP

TEMP.

ON/OFF

KEYSTONE