Quadra-Fire CASTINS-CSB 사용자 설명서

R

August 20, 2009

250-7251G

Page  27

 Odors and vapors released during initial operation.

•  Curing of high temperature paint.
•  Open windows for air circulation.

Odors may be irritating to sensitive individuals.

1.  Metallic noise.

1.  Noise is caused by metal expanding and contracting as 

it heats up and cools down, similar to the sound pro-
duced by a furnace or heating duct.  This noise does not 
affect the operation or longevity of your appliance.

2.  Ash buildup on glass.

2.  This is normal.  Clean the glass.

3.  Glass has turned dirty.

3.  Excessive build up of ash.  The lower burn settings will 

produce more ash, the higher burn settings produce 
less.  The more it burns on low the more frequent clean-
ing of the glass is required.

4.  Fire has tall fl ames with black tails and is lazy.

4.  The feed rate needs to be reduced or the fi repot needs 

cleaning.  Heat exchanger or exhaust blower needs 
cleaning.

5.  Smokey start-up or puffs of smoke from the airwash. 5.  Either the fi repot is dirty or there is too much fuel at 

start-up and not enough air.  Close down feed rate 1/4 
(6mm) inch at a time until this no longer happens.

6.  Large fl ame at start-up.

6.  This is normal.  Flame will settle down once the fi re is 

established.