Regency Wraps F33 사용자 설명서

Regency

®

 F33-3 Freestanding Gas Stove

19

Strain relief

grommet

Placement of Decal

“Warning 240 Volts

Turn Off Power”

For Leg Unit: Remove 7 screws,  remove bottom access panel and 
replace fan assembly.

1)  Disconnect power to fan.

2)  Open pedestal door and remove door cover plate by removing 4 

screws. See diagram 1.

3)  Remove valve cover plate by removing 2 screws.

4)  Disconnect the molex plug (from inside the stove).

5)  Loosen the four 8-32 x 1/2 screws provided into the nutserts 

as shown in diagram 3. NOTE: Make sure the fan is supported 
as it may fall when the 4 screws are loosened.

6)  Disconnect the 2 ground wires (green and yellow/green striped) 

to the ground lug as per diagram 2.