DELL E30S 사용자 설명서

3. bezel key

4. slot on the chassis (2)

5. bezel tab (2)

6. bezel

Removing the front bezel

1.

Unlock the bezel using the bezel keys.

2. Press the release latch at the top of the bezel.
3. Pull the top end of the bezel away from the system.
4. Remove the bezel by unhooking the bezel tabs from the slots at the bottom of the system.

System feet

The system feet provide stability to the system in the tower mode.

Removing the system feet

Prerequisites

NOTE: It is recommended that you remove the system feet only when you are converting the 

system from the tower mode to the rack mode, or when you are replacing the system feet with the 

wheel assembly.

1.

2.

Keep the #2 Phillips screwdriver ready.

3.

Turn the system feet inward.

4.

Lay the system on its side on a flat and stable surface. 

Steps

Remove the screws securing the system feet to the base of the tower.

51