DELL E30S 사용자 설명서

Figure 11. Removing and installing the system feet

screw hole (4)

2. slot (12)

3. tab (12)

4. base of the tower

5. system feet (4)

6. screw (4)

Related Links

Prerequisites

CAUTION: Installing the feet on a stand-alone tower system is necessary to provide a stable

foundation for the system. Failure to install the feet poses the risk of having the system tip over,

possibly causing bodily injury or damage to the system.

Keep the #2 Phillips screwdriver ready.

Lay the system on its side on a flat and stable surface.

Steps
1.

Align the three tabs on the system feet with the three slots on the base of the chassis.

2. Secure the system feet to the base of the chassis by using the screws.