DELL E30S 사용자 설명서

Next steps
Place the system upright on a flat and stable surface, and turn the system feet outward.

Related Links

Caster wheels (optional)—tower mode

Caster wheels provide mobility to the system in the tower mode.
The caster wheel assembly consists of:

• Caster wheel units (front and back)
• Two screws for the caster wheel units

Installing caster wheels

Prerequisites

1.

2.

Keep the #2 Phillips screwdriver ready.

3.

Lay the system on its side on a flat and stable surface with the base of the system extending off the 

edge of the surface. 

4.

If installed, remove the system feet.

Steps
1.

Align the two retention hooks on the back wheel unit with the two slots on the base of the chassis, 

and insert the hooks into the slots.

2. Offset the back wheel to the back of the system and secure the unit in place using a single screw.
3. Align the two retention hooks on the front wheel with the two slots on the base of the chassis and 

insert the hooks into the slots.

4. Offset the front wheel to the front and secure the unit in place using a screw.

53