Sony STRDH520 사용자 설명서

다운로드
페이지 72
66
GB
D:\NORM'S JOB\SONY HA\SO0109\STR-DH520\4263361111_GB\GB09REM_STR-DH520-
U2.fm
masterpage: Left
STR-DH520
4-263-361-11(1)
No sound is output from the receiver 
and TV speaker.
• Check the setting of “AUDIO.OUT” in the 
• Check that the equipment is connected 
correctly to the HDMI jack for that 
equipment.
• You cannot listen to the Super Audio CD 
by connecting HDMI.
• Depending on the playback equipment, 
you may need to set up the HDMI setting 
of the equipment. Refer to the operating 
instructions supplied with each 
equipment.
• Be sure to use a High Speed HDMI cable 
when you view images or listen to sound, 
especially for the 1080p, Deep Color 
(Deep Colour) or 3D transmission.
• Make sure the TV is compatible with the 
System Audio Control function.
• If the TV does not have System Audio 
Control function, set the “AUDIO.OUT” 
settings in HDMI menu to
– “TV+AMP” if you want to listen to the 
sound from the TV speaker and receiver.
– “AMP” if you want to listen to the sound 
from the receiver.
• When you connect the receiver to a video 
equipment (projector, etc.), sound may not 
be output from the receiver. In this case, 
select “AMP”.
• If you cannot listen to the sound of the 
equipment connected to the receiver while 
TV input is selected
– Be sure to change the input of the 
receiver to HDMI when you want to 
watch a program on the equipment 
connected via HDMI connection to the 
receiver.
– Change the TV channel when you want 
to watch a TV broadcast.
– Be sure to select the correct equipment 
or input you want when you watch a 
program from the equipment connected 
to the TV. Refer to the operating 
instructions of the TV on this operation.
There is severe hum, interrupted noise 
or distortion from the equipment 
connected to the PORTABLE IN jack.
• Check that the equipment are connected 
securely.
• This is not a malfunction and will depend 
on the connected equipment.
No image appears on the TV.
• Select the appropriate input using the input 
buttons.
• Set your TV to the appropriate input mode.
• Move your audio equipment away from 
the TV.
• Assign the HDMI and COMPONENT 
VIDEO input jacks correctly.
• Make sure that cables are correctly and 
securely connected to equipment.
• Depending on the playback equipment, 
you may need to set up the equipment. 
Refer to the operating instructions 
supplied with each equipment.
• Be sure to use a High Speed HDMI cable 
when you view images or listen to sound, 
especially for the 1080p, Deep Color 
(Deep Colour) or 3D transmission.
No 3D image appears on the TV.
• Depending on the TV or the video 
equipment, 3D images may not be 
displayed.
Image