Sony STRDH520 사용자 설명서

D:\NORM'S JOB\SONY HA\SO0109\STR-DH520\4263361111_GB\GB09REM_STR-DH520-
U2.fm

STR-DH520

4-263-361-11(1)

• Check the HDMI connection (page 21, 

• Make sure “CTRL.HDMI” is set to 

“CTRL ON” in the HDMI menu. 

• Make sure the connected equipment is 

compatible with the Control for HDMI 
function.

• Check the Control for HDMI settings on 

the connected equipment. Refer to the 
operating instructions of the connected 
equipment.

• When “CTRL.HDMI” is set to “CTRL 

OFF”, the “BRAVIA” Sync does not work 
properly, even if a equipment is connected 
to the HDMI IN jack.

• The types and the number of equipment 

which can be controlled by the 
“BRAVIA” Sync are restricted in the 
HDMI CEC standard as follows.
– Recording equipment (Blu-ray Disc 

recorder, DVD recorder, etc.): up to 3 
equipment

– Playback equipment (Blu-ray Disc 

player, DVD player, etc.): up to 3 
equipment

– Tuner-related equipment: up to 4 

equipment

– AV receiver (audio system): up to 1 

equipment

• Depending on the connected equipment 

and TV, you may need to set up the 
equipment and TV. Refer to the operating 
instructions supplied with each equipment 
and TV.

• Change the input of the receiver to the 

HDMI input connected to the equipment.

If there is a malfunction, a message appears on 
the display panel. You can check the condition 
of the system by the message. If any problem 
persists, consult your nearest Sony dealer. 
If an error message appears while you perform
Auto Calibration, see “When error codes 
appear” (page 34) to solve the problem.

Irregular current is output to the speakers, or 
the receiver is covered and ventilation holes 
are blocked. The receiver will automatically 
turn off after a few seconds. Check the 
speaker connection and turn on the power 
again.

All memorized settings

Customized sound fields