TOA Electronics VM-2120 사용자 설명서

58

Here, the operation example of assigning Recorded Message 1 to Broadcast Groups 1, 3, and 4  will be
explained. (See p. 52 "Message 1 to group" setting example.) 

Step 1. Entry to recorded message setting mode 

Press and release the Reset key while holding down the
ZONE 1 and ZONE 3 keys. When all indicators for
Zones 1 – 5 begins to flash (2 – 3 seconds after),
release both the ZONE 1 and ZONE 3 keys. 

The unit will be placed in recorded message setting
mode. 
The 5 indicators for ZONE 1 through ZONE 5 begin to
flash. (They indicate Message 1 through Message 5.) 

Operations of Steps 2 – 6 described hereafter are the same as those described in the previous section Control
input/Telephone paging/Westminster chime-to-Group assignment. However, read 5 setting items of Inputs 1 –
3, TEL paging, and Westminster chime as Messages 1 – 5. 

Shown on the right is the status of each indicator that results
from the group number setting (Example. Groups 1, 3, and 4)
performed in Step 4. 

ZONE 1

ZONE 3

Reset

ZONE 1

ZONE 2

ZONE 3

ZONE 4

ZONE 5

ALL

Message 1

Message 5

ZONE 1

ZONE 2

ZONE 3

ZONE 4

ZONE 5

ALL

Group 1
(Message 1)

Group 5