Netgear FVS318N 사용자 설명서

다운로드
페이지 425
LAN Configuration
76
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N 
3. 
Enter the settings as explained in the following table. The IPv6 address pools and prefixes 
for prefix delegation are explained in the sections following the table.
Table 13.  LAN Setup screen settings for IPv6 
Setting
Description
IPv6 LAN Setup
IPv6 Address
Enter the LAN IPv6 address. The default address is FEC0::1.(For more information, 
see the introduction to this section, 
.)
IPv6 Prefix Length
Enter the IPv6 prefix length, for example, 10 or 64. The default prefix length is 64.
DHCPv6
DHCP Status
Specify the status of the DHCPv6 server:
•  Disable DHCPv6 Server. This is the default setting, and the DHCPv6 fields are 
masked out.
•  Enable the DHCPv6 Server. If you enable the server, you need to complete the 
DHCPv6 fields.
DHCP Mode
Select one of the DHCPv6 modes from the drop-down list:
• Stateless. The IPv6 clients generate their own IP address by 
using a combination of locally available information and router 
advertisements, but receive DNS server information from the 
DHCPv6 server. For stateless DHCPv6, you need to configure 
the RADVD and advertisement prefixes (see 
on page 80). As an option, you can 
enable prefix delegation (see the explanation further down in 
this table).
•  Stateful. The IPv6 clients obtain an interface IP address, 
configuration information such as DNS server information, and 
other parameters from the DHCPv6 server. The IP address is a 
dynamic address. You need to add IPv6 address pools to the 
List of IPv6 Address Pools table on the LAN Setup screen (see 
Prefix Delegation
If you have selected the stateless DHCPv6 mode, you can select 
the Prefix Delegation check box: 
•  Prefix delegation check box is selected. The stateless 
DHCPv6 server assigns prefixes to its IPv6 LAN clients. Make 
sure that the Prefix Delegation check box on the ISP 
Broadband Settings screen for IPv6 is also selected (see 
page 39) to enable the wireless VPN firewall to acquire a prefix 
from the ISP through prefix delegation. In this configuration, a 
prefix is automatically added to the List of Prefixes to Advertise 
table on the LAN RADVD screen for IPv6 (see 
• Prefix delegation check box is cleared. Prefix delegation is 
disabled in the LAN. This is the default setting.
Domain Name
Enter the domain name of the DHCP server.