Netgear FVS318N 사용자 설명서

Click Apply to save your changes.

If you configure a stateful DHCPv6 server for the LAN, you need to add local DHCP IPv6 
address pools so the DHCPv6 server can control the allocation of IPv6 addresses in the LAN.



On the LAN Setup screen for IPv6, under the List of IPv6 Address Pools table, click 
Add. The LAN IPv6 Config screen displays:

DHCP Status

 

(continued)

Server Preference

Enter the DHCP server preference value. The possible values 
are 0–255, with 255 as the default setting.

This is an optional setting that specifies the server’s preference 
value in a server advertise message. The client selects the 
server with the highest preference value as the preferred server.

DNS Servers

Select one of the DNS server options from the drop-down lists:

• Use DNS Proxy. The wireless VPN firewall acts as a proxy for 

all DNS requests and communicates with the ISP’s DNS 
servers that you configured on the Broadband ISP Settings 
(IPv6) screen (see 

• Use DNS from ISP. The wireless VPN firewall uses the ISP’s 

DNS servers that you configured on the Broadband ISP 
Settings (IPv6) screen (see 

on page 41).

• Use below. When you select this option, the DNS server fields 

become available for you to enter IP addresses.

Primary DNS Server

Enter the IP address of the primary 
DNS server for the LAN.

Secondary DNS Server

Enter the IP address of the secondary 
DNS server for the LAN.

Lease/Rebind Time

Enter the period after which the DHCP lease is renewed with the 
original DHCP server or rebound with another DHCP server to 
extend the existing DHCP lease. The default period is 
86400 seconds (24 hours).