Netgear FVS318N 사용자 설명서
LAN Configuration
78
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Figure 39.
2.
Enter the settings as explained in the following table:
3.
Click Apply to save your changes and add the new IPv6 address pool to the List of IPv6
Address Pools table on the LAN Setup screen for IPv6.
Address Pools table on the LAN Setup screen for IPv6.
To edit an IPv6 LAN address pool:
1.
On the LAN Setup screen for IPv6 (see
on page 75), click the Edit button in
the Action column for the address pool that you want to modify. The LAN IPv6 Config
screen displays.
screen displays.
2.
Modify the settings as explained in the previous table.
3.
Click Apply to save your settings.
To delete one or more IPv6 LAN address pools:
1.
On the LAN Setup screen for IPv6 (see
on page 75), select the check box to
the left of each address pool that you want to delete, or click the Select All table button
to select all address pools.
to select all address pools.
2.
Click the Delete table button.
Table 14. LAN IPv6 Config screen settings
Setting
Description
Start IPv6 Address
Enter the start IP address. This address specifies the first of the contiguous
addresses in the IP address pool. Any new DHCPv6 client joining the LAN is
assigned an IP address between this address and the end IP address.
addresses in the IP address pool. Any new DHCPv6 client joining the LAN is
assigned an IP address between this address and the end IP address.
End IPv6 Address
Enter the end IP address. This address specifies the last of the contiguous
addresses in the IP address pool. Any new DHCPv6 client joining the LAN is
assigned an IP address between the start IP address and this IP address.
addresses in the IP address pool. Any new DHCPv6 client joining the LAN is
assigned an IP address between the start IP address and this IP address.
Prefix Length
Enter the IPv6 prefix length, for example, 10 or 64.