Netgear WG602V4 사용자 설명서

Installation and Configuration

2-15

Before customizing your wireless settings, print this form and record the following information. (If 
you are working with an existing wireless network, the person who set up or is responsible for the 
network will be able to provide this information.) After you record the settings for your wireless 
network, store this form in a safe place.

•

Wireless Network Name (SSID): ______________________________ The SSID, identifies 
the wireless network. You can use up to 32 alphanumeric characters. The SSID is case 
sensitive. The SSID in the wireless adapter card must match the SSID of the wireless access 
point. In some configuration utilities (such as in Windows XP), the term “wireless network 
name” is used instead of SSID. 

•

If WEP Authentication is Used. Circle one: Open System, Shared Key, or Mix. 

Note: If you select Shared Key, the other devices in the network will not connect unless they 
are set to Shared Key as well and are configured with the correct key.

–

WEP Encryption key size. Choose one: 64-bit or 128-bit. Again, the encryption key size 
must be the same for the wireless adapters and the wireless access point.

–

Data Encryption (WEP) Keys. There are two methods for creating WEP data encryption 
keys. Whichever method you use, record the key values in the spaces below.
•

Passphrase method. ______________________________ These characters are case 
sensitive. Enter a word or group of printable characters and click the Generate Keys 
button. Not all wireless devices support the passphrase method.

•

Manual method. These values are not case sensitive. For 64-bit WEP, enter 10 hex 
digits (any combination of 0-9 or a-f). For 128-bit WEP, enter 26 hex digits.

Key 1: ___________________________________ 

Key 2: ___________________________________ 

Key 3: ___________________________________ 

Key 4: ___________________________________ 

•

If WPA-PSK or WPA2-PSK Authentication is Used. 

–

WPA Passphrase: ______________________________ 

–

WPA2 Passphrase: ______________________________ 

These characters are case sensitive. Enter a word or group of printable characters. When you 
use WPA-PSK or WPA2-PSK, the other devices in the network will not connect unless they 
are set to WPA-PSK or WPA2-PSK as well and are configured with the correct Passphrase.