Netgear WG602V4 사용자 설명서

2-16

Installation and Configuration

If you use a wireless PC to configure WEP settings, you will be disconnected when you click 
Apply. Reconfigure your wireless adapter to match the new settings or access the wireless access 
point from a wired PC to make any further changes.

To configure WEP data encryption:

1. From under the Setup menu in the left-hand panel, click Security Settings.The Security 

Settings screen will display.

2. From the Security Type pull-down menu, select WEP.

3. From the Authentication Type pull-down menu, select either Mix or Shared Key to use WEP 

data encryption.

4. From the Encryption Strength pull-down menu, select either 64-bit or 128-bit encryption.

5. Program the four Security Encryption (WEB) Keys either manually or automatically. The 

values must be identical on all PCs and access points in your network.
•

Automatic – Enter a word or group of printable characters in the Passphrase box and click 
the Generate button. The four key boxes will be automatically populated with key values; 
Key 1 is the active key by default.

•

Manual – Enter 10 hexadecimal digits (any combination of 0-9, a-f, or A-F)
Select which of the four keys will be active.